Aluminium Flat Bar

Short Description:

Ordinary hard aluminium alloys with good machinability and medium strength 6061 is a heat-treatable alloy with good formability, weldability, machinability, medium strength and good workability even after annealing.

Product Details

Product Tags

Product Details

Product Name Aluminum Flat Profile/Bar/Rod
Material Type Aluminium
Alloy Grade 1000 Series: 1050, 1060, 1070, 1080, 1100, 1435, etc
2000 Series: 2011, 2014, 2017, 2024, etc
3000 Series: 3002, 3003, 3104, 3204, 3030, etc
5000 Series: 5005, 5025, 5040, 5056, 5083, etc
6000 Series: 6101, 6003, 6061, 6063, 6020, 6201, 6262, 6082, etc
7000 Series: 7003, 7005, 7050, 7075, etc
Temper T3-T8
Standard ASTM, ASME,EN, JIS, DIN,GB/T etc
Size Mininum Wall Thickness: 0.7 mm, Maximum Circumscribed Circle Diameter: 300 mm
Shape Round/Square/Rectangular/Custome Shape
Surface Mill Finish, Anodized, Electrophoresis, Powder Coating, Wooden Grain, Sand Blasting or Custom
Color Bright Silver, Black, Champagne, Gold, Rose Gold, Bronze, Blue, Grey or Custom
Application 1. Light, Solar Panel.
2. Architectural Trim, Ceiling, Cabinet etc.
3. Suitcase, Elevator, Nameplate, Photo Frame etc.
4. Automobile Decoration
5. Furniture Components
6. Domestic Appliances: Refrigerator, Micro-Wave Oven, Stereo Equipment.
7. Aerospace and Aviation.
8, Athletic Frames, Racks etc.

Product Description

Ordinary hard aluminium alloys with good machinability and medium strength

6061 is a heat-treatable alloy with good formability, weldability, machinability, medium strength and good workability even after annealing.

The main alloying elements of alloy 6061 are magnesium and silicon, and form the Mg2Si phase. Small amounts of manganese and chromium are added to neutralise the bad effects of iron; sometimes small amounts of copper or zinc are added to improve the strength of the alloy without significantly reducing its corrosion resistance; small amounts of copper are added to the conductive material to counteract the bad effects of titanium and iron on conductivity; zirconium or titanium refine the grain and control recrystallisation.

6061-T651 is the main alloy of 6061 alloy, is produced by heat treatment pre-drawing process of aluminium alloy products, its strength can not be compared with 2XXX series or 7XXX series, but its magnesium, silicon alloy characteristics, with processing performance, welding characteristics and plating, good corrosion resistance, high toughness and processing after the non-deformation, dense material without defects and easy to polish, easy to color film, oxidation effect, etc.


Typical uses

6061 is used in aerospace fixtures, electrical fixtures, communications, as well as in automated mechanical parts, precision machining, mould making, electronics and precision instrumentation, SMT, PC board solder carriers, etc.

In addition to 6061 material, available grades are: 1050, 1060, 1070, 2A11, 2A12, 2A14, 2A50, 2017, 2024, 3003, 4032, 5052, 5056, 5A02, 5083, 6061, 6063, 6A02, 6101, 6082 7A04, 7A09 7075 etc.

Aluminum alloy of various materials, capable of producing aluminum profiles of various specifications.

Model A(mm) T(mm) Wire density(kg/m)
L0115 6 4 0.065
L0108 13 3 0.105
L01175 15 3 0.122
L0135 20 2 0.163
L01209 30 4 0.325
L0155 50 12 1.626
L0195 80 20 4.335
L01122 100 18 4.878
L0105 150 20 8.13
L01104 200 35 18.97
L01101 250 24 16.258
L01162 280 16 12.141
L01163 300 25 20.325
L11221 400 40 43.45
L11226 500 30 40.76
L11227 600 20 32.64

600mm wide aluminium rows can be produced according to customer drawing requirements.
Technical requirements
Cross-sectional tolerance: ±0.1 - ±1mm (the size of the tolerance depends on the width of the cross-section of the material and the structure of the graphic)

Straightness: 0.5 - 0.8 mm/m
Plane clearance: W (width of profile) x 0.6mm
Material: 1060.2a12.3003.5083.6061.6063.6005.7003.7075
Surface treatment: tinted oxidation. Sandblasted oxidation. Brushed oxidation. Polished bright oxidation. Spraying in various colours. Fluorocarbon spraying
Mould opening cycle: 5 - 20 working days (depending on the size of the mould)
Product cycle time: 7 - 15 working days

Fabrication Service



Deburring, Brushing, Graining, Sanding, Polishing, Abrasive blasting, Shot blasting, Glass bead blasting, Burnishing, Anodizing, Powder coating, Electrophoresis

detail (4)
detail (5)

Jiangyin City METALS Products Co.,Ltd can provide a wide range of both special and structural stainless steel shapes.

  • Previous:
  • Next:

  • Write your message here and send it to us

    Products categories